- Voltage - Rated :
- Features :
- Type :
- Termination Style :
- Diameter - Shaft :
- Length - Shaft and Bearing :
- Mounting Hole Spacing :
- Coil Resistance :
- Filtrado seleccionado :
4 Productos
Imagen | Modelo | Precio | Cantidad | Existencias | Fabricant | Descripción | Series | Part Status | Voltage - Rated | Operating Temperature | Size / Dimension | Features | Type | Termination Style | Current Rating | Accuracy | Diameter - Shaft | Length - Shaft and Bearing | Mounting Hole Spacing | Coil Type | Steps per Revolution | Step Angle | Torque - Holding (oz-in / mNm) | NEMA Frame Size | Coil Resistance | |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Ver |
2,169
Tenemos efectivo.
|
DFRobot | BIPOLAR STEPPER MOTOR WITH PLANE | - | Active | 2.7VDC | -20°C ~ 50°C | Square - 1.654" x 1.654" (42.00mm x 42.00mm) | Flatted Shaft | Hybrid Gear Motor | Wire Leads | - | ±5% | 0.315" (8.00mm) | 0.787" (20.00mm) | 1.100" (28.00mm) | Bipolar | - | 1.8° | 48.6 / 343.19 | 17 | 1.5 Ohms | |||
|
Ver |
616
Tenemos efectivo.
|
DFRobot | HYBRID STEPPER MOTOR FOR 3D PRIN | - | Active | 3.4VDC | -20°C ~ 50°C | Square - 1.654" x 1.654" (42.00mm x 42.00mm) | Round Shaft | Hybrid | Connector | 1.7A | ±5% | 0.197" (5.00mm) | 0.945" (24.00mm) | 1.220" (31.00mm) | Bipolar | 200 | 1.8° | 48.6 / 343.19 | 17 | 2 Ohms | |||
|
Ver |
2,169
Tenemos efectivo.
|
DFRobot | BIPOLAR STEPPER MOTOR WITH PLANE | - | Active | 2.7VDC | -20°C ~ 50°C | Square - 1.654" x 1.654" (42.00mm x 42.00mm) | Flatted Shaft | Hybrid Gear Motor | Wire Leads | - | ±5% | 0.315" (8.00mm) | 0.787" (20.00mm) | 1.100" (28.00mm) | Bipolar | - | 1.8° | 48.6 / 343.19 | 17 | 1.5 Ohms | |||
|
Ver |
616
Tenemos efectivo.
|
DFRobot | HYBRID STEPPER MOTOR FOR 3D PRIN | - | Active | 3.4VDC | -20°C ~ 50°C | Square - 1.654" x 1.654" (42.00mm x 42.00mm) | Round Shaft | Hybrid | Connector | 1.7A | ±5% | 0.197" (5.00mm) | 0.945" (24.00mm) | 1.220" (31.00mm) | Bipolar | 200 | 1.8° | 48.6 / 343.19 | 17 | 2 Ohms |
1 / 1 Página